Sold as a Pair

Billet Aluminium

Allows conversion of cast wheels to wire wheels on later Bevel models

5 Hole to suit all Bevel/Pantah/Early Belt

Light Weight Aluminium

Anodized for strength and wear resistance

Ducati Part Number 0755.92.295

Girling shocks to suit bevel twin Ducati motorcycles.

Most bevels only come in either 330 or 310mm shock lengths and are preload adjustable only.

The good thing about these Girlings is you can adjust the length easily via the screw collet to either the 330 or 310mm lengths.

Also there are a plethora of mounting spacers to suit pretty much any bike.

Replacement Billet Cush Drive Hub for use on rear wire wheels using 240mm discs and fitted with either Brembo or Lockheed callipers.

Can be used with our V2-16-203 disc carrier

This part is machined from a solid aluminium billet and is blasted externally so that, when fitted, it has an authentic original casting appearance. 

Ducati Part 0797.80.440

Japanese made NHK steering damper.

Not some cheap copy, these are exact replicas of the steering damper Mike Hailwood used on his 1978 TT wining NCR machine, and the same as used on early Darmahs.

Fantastic quality and built to last.

270mm in length.

Billet Aluminium

Replacement for original hub with wire wheels using 280mm 6 bolt discs.

To be used with V2-16-205 cush drive hub 

4 x Cap screws (M10x70) supplied with the part to replace the original hex head bolts

Gear Gazer suits all Ducati Bevel Vee Twins. Includes Gasket.

Billet Aluminium

Allows conversion of cast wheels to wire wheels on later Bevel Models

4 x Cap screws (M10x70) supplied with the part to replace the original hex head bolts

Billet Aluminium

Replacement for original hub with wire wheels using 240mm disc with either Brembo or Lockheed calipers.

To be used with our V2-16-205 cush drive hub.

SS/MHR Rear Indicator Bracket

Authentic Reproduction Part

Finished in Chrome Plate

Equivalent Ducati Part Numbers 0797.03.080 and 0797.03.083