$181.50 AUD inc 10% GST

Sprag clutch (starter) bearing fits all electric start Bevel twins fitted with Vee Two upgraded starter clutch kits.

Advantages

The design utilizes a larger diameter sprag bearing available from current model Ducatis which handles much higher torque loadings.

 

 

$363.00 AUD inc 10% GST

Kickstart gear for Vee Two close ratio gearbox only. 

Advantages

All Vee Two gearbox components are manufactured to be interchangeable with, and of equal or higher quality than, the standard issue items for improved durability.

Material

Steel, case hardened to Rockwell 64

$471.90 AUD inc 10% GST

Reconditioned kickstarter shaft. They are available in three lengths to suit Square case , Round case short and Round case long. 

This is an exchange service only.  

Advantages

Vee Two Kick Start shaft repair consists of both the external spline and internal circlip groove being repaired. Both of these areas can fail on these shafts .The shafts are machined and welded . Re machined and heat treated. 

$803.00 AUD inc 10% GST

Electric Start Sprag Clutch Upgrade Kit. With light flywheel to suit dry clutch 900MHR.

Advantages

This Upgrade Sprag Clutch Kit is designed and manufactured  by VEE TWO. The design utilizes a larger diameter sprag bearing available from current model Ducatis which handles much higher torque loadings. The flywheel is light weight for enhanced performance. This is a drop in kit requiring no modification.

Material

Heat treated high grade case hardening steel. 

 

 

$803.00 AUD inc 10% GST

Electric Start Sprag Clutch Upgrade Kit. With light flywheel to suit dry clutch Mille.

Advantages

This Upgrade Sprag Clutch Kit is designed and manufactured  by VEE TWO. The design utilizes a larger diameter sprag bearing available from current model Ducatis which handles much higher torque loadings. The flywheel is light weight for enhanced performance. This is a drop in kit requiring no modification.

Material

Heat treated high grade case hardening steel. 

 

 

$803.00 AUD inc 10% GST

Electric Start Sprag Clutch Upgrade Kit. With light flywheel to suit Pantah SL TL 350,500,600,650,750EL’/750, 906, 907 Paso/Allazzura/750 F1/851 888.

Advantages

This Upgrade Sprag Clutch Kit is designed and manufactured  by VEE TWO. The design utilizes a larger diameter sprag bearing available from current model Ducatis which handles much higher torque loadings. The flywheel is light weight for enhanced performance. This is a drop in kit requiring no modification.

Material

Heat treated high grade case hardening steel. 

 

$803.00 AUD inc 10% GST

Electric Start Sprag Clutch Upgrade Kit. With light flywheel to suit SD 900 / S2 900 / SSD 900, all BOSCH Ignition engines.

Advantages

This Upgrade Sprag Clutch Kit is designed and manufactured  by VEE TWO. The design utilizes a larger diameter sprag bearing available from current model Ducatis which handles much higher torque loadings. The flywheel is light weight for enhanced performance. This is a drop in kit requiring no modification.

Material

Heat treated high grade case hardening steel. 

Ducati Parts

0799.50.150
0799.50.188
0799.50.195
0799.50.190
0799.50.070

 

 

Pre-sales Questions?

If you're unsure about the suitability of this part for your bike, send us a note here with the necessary information and we'll get right back to you.

You can also call or email us here

+61 448 749 921
[email protected]

Join us on Facebook

Vee Two Australia

Loading