Girling shocks to suit bevel twin Ducati motorcycles.
Most bevels only come in either 330 or 310mm shock lengths and are preload adjustable only.
The good thing about these Girlings is you can adjust the length easily via the screw collet to either the 330 or 310mm lengths.
Also there are a plethora of mounting spacers to suit pretty much any bike.
Ducati Part
0755.29.210
L/H Thread Camshaft Nut for Ducati singles and V Twins
Authentic Reproduction Part
Finish - plain steel
Equivalent Ducati Part Number 0400.29.050
Main bearing sleeve machined to standard size for all bevel twins. (Outside diameter 86.05mm)
Advantages
Incorrectly sized Main Bearings Sleeves can be a trouble spot on Bevel drive Ducati's. If the fitment is a loose fit, the bearing sleeves can turn in their housings, or alternatively if the bearing sleeves are too tight, this can lead to cracked crankcases and an extremely short life span for your main bearings.
This standard sleeve is machined to the exact size as the factory intended on their drawings.
Material
Carbon Steel
0755.49.205
Blank main bearing sleeve left oversize at 87mm outside diameter for you to finish machine to suit your engine case.
If required, we can machine these to suit your case, ask for a quote via our contact form.
Gear Gazer suits all Ducati Bevel Vee Twins. Includes Gasket.
Inlet manifold gasket kit to suit all bevel models with the "narrow stud" inlet manifolds. Includes o'rings and sold as a pair.
Will not distort and has machined o-ring grooves in order to provide a positive seal. Has the external appearance of the original factory item.
Billet Aluminium - Anodised Satin Black
Measurement stud centre to stud centre = 52mm
Inlet manifold gasket kit to suit all bevel models with the "wide stud" inlet manifolds. Includes o'rings and sold as a pair.
Measurement stud centre to stud centre = 58mm
Sold as a Pair
Billet Aluminium
Allows conversion of cast wheels to wire wheels on later Bevel models
Allows conversion of cast wheels to wire wheels on later Bevel Models
4 x Cap screws (M10x70) supplied with the part to replace the original hex head bolts
Replacement for original hub with wire wheels using 240mm disc with either Brembo or Lockheed calipers.
To be used with our V2-16-205 cush drive hub.
Replacement for original hub with wire wheels using 280mm 6 bolt discs.
To be used with V2-16-205 cush drive hub
Prices are displayed without tax. Online payments are processed in AUD regardless of the displayed currency. Applicable tax is added in the checkout.
If you're unsure about the suitability of this part for your bike, send us a note here with the necessary information and we'll get right back to you.
+61 448 749 921 [email protected]
Vee Two Australia
Phone +61 448 749 921 Email [email protected]
ABN 34 642 249 750
Prices are in Australian Dollars inc 10% GST. International buyers will not pay GST.