Oil sight window anodised silver - 6061 - T6 alloy
Fits Mille, Dry Clutch 900 and Pantah variants
Oil sight window anodised black - 6061 - T6 alloy
Dip stick to fit all Bevel Singles anodised silver - 6061 - T6 alloy
Fitted with a rare earth magnet
Dip stick to fit all wet clutch Bevel Twins anodised silver - 6061 - T6 alloy
Alloy gland nut anodised silver - 6061-T6 alloy
Suits Sachse pick up wiring 3.5mm
Fits Ducati Electronica (Stator Plate) Ignition model Bevel Twins
Alloy gland nut anodised black - 6061-T6 alloy
Fits Bosch Ignition models Bevel Twins and Pantah
Thread Size - 22mm x 1.5mm
Alloy gland nut anodised clear - 6061-T6 alloy
Gear Gazer suits all Ducati Bevel Vee Twins. Includes Gasket.
Our book by Paul Barden delivers the inside story of the amazing twists and turns that led to the construction of the 'Chequered Flag' bike, EXACTLY as it was on June 3rd, 1978.
The book details the project with unprecedented access to the key players, and the original machine that the Vee Two bike emulates. There are pages of photographs of the manufacture and build of these iconic replica machines, together with many historic photographs and memories of the race day on June 3rd 1978.
Inlet manifold gasket kit to suit all bevel models with the "narrow stud" inlet manifolds. Includes o'rings and sold as a pair.
Will not distort and has machined o-ring grooves in order to provide a positive seal. Has the external appearance of the original factory item.
Billet Aluminium - Anodised Satin Black
Inlet manifold gasket kit to suit all bevel models with the "wide stud" inlet manifolds. Includes o'rings and sold as a pair.
These footrests are exact replicas of the original factory units.
Medium Tensile Steel - Zinc plated for authenticity
Blank main bearing sleeve semi finished can be machined to required tolerance
Incorrectly sized Main Bearings Sleeves can be a trouble spot on Bevel drive Ducati's. If the fitment is a loose fit, the bearing sleeves can turn in their housings, or alternatively if the bearing sleeves are too tight, this can lead to cracked crankcases and an extremely short life span for your main bearings.
Main bearing sleeve machined to standard size for all bevel twins. (86.05mm)
This standard sleeve is machined to the exact size as the factory intended on their drawings.
Replacement wear washer set for factory friction steering damper, as used on both single and twin bevels.
Manufactured new with improved material.
Compressed Fiber Material
Oil filter cap to suit all square case models. Includes o'ring, bolt and alloy washer
Will not distort and has a machined o-ring groove in order to provide a positive seal. The appearance is an exact replica of the original factory item.
Breather tower to suit all bevel models
The body is sealed with an “O” ring and screwed together for ease of assembly and on-going servicing. Pipe exit is vertical, which allows the pipe to clear racing and performance carbs. The new breather is a modification which bolts on and eliminates unwanted oil leaks.
Complete oil pump including gasket to suit all square case models (NOT MILLE)
Vee Two Oil Pumps are machined from High Density, Heat Treated Aluminium to exacting tolerances.Pump gears are machined from high grade steel and individually matched for maximum oil delivery.The pump is supplied with oil pump gears, surface ground backing plate and sealing gasket.
6061 T6 Alloy
Complete oil pump including gasket to suit all roundcase models
Vee Two Oil Pumps are machined from High Density, Heat Treated Aluminium to exacting tolerances.Pump gears are machined from high grade steel and individually matched for maximum oil delivery.The pump is supplied with oil pump gears, surface ground backing plate and rubber sealing gasket.
Prices are displayed without tax. Online payments are processed in AUD regardless of the displayed currency. Applicable tax is added in the checkout.
If you're unsure about the suitability of this part for your bike, send us a note here with the necessary information and we'll get right back to you.
+61 448 749 921
Vee Two Australia
Phone +61 448 749 921
Email [email protected]
ABN 34 642 249 750
Prices are in Australian Dollars inc 10% GST. International buyers will not pay GST.