Ignition Pick Up to suit your Bike

These can be purchased individually to replace damaged or worn-out components without the need to buy the whole ignition kit.

Let us know the Make, Model and engine size of your bike via an enquiry and we can give you a price.

We can supply spare parts for all the ignition systems we sell.

Send an enquiry with the Make, Model and engine size of your bike.

Ideally, include a description of the parts needed with part numbers or photographs.

Lucas 5 K ohm Resistor Spark Plug Cap Black

Advantages

Featuring a resistor element pressed in between the plug terminal and the high tension wire connection, the construction is extremely durable, the resistor element is long enough to prevent interior flashover, and steady resistance is maintained. 

 

 

 

Alloy gland nut anodised black - 6061-T6 alloy

Suits Sachse pick up wiring 3.5mm

Fits Bosch Ignition models Bevel Twins and Pantah

 

Alloy gland nut anodised black - 6061-T6 alloy

Suits Sachse pick up wiring 3.5mm

Fits Bosch Ignition models Bevel Twins and Pantah

 

Alloy gland nut anodised black - 6061-T6 alloy

Thread Size - 22mm x 1.5mm

 

Alloy gland nut anodised clear - 6061-T6 alloy

Thread Size - 22mm x 1.5mm

 

Alloy gland nut anodised black - 6061-T6 alloy

Suits Sachse pick up wiring 3.5mm

Fits Ducati Electronica (Stator Plate) Ignition model Bevel Twins 

 

Alloy gland nut anodised silver - 6061-T6 alloy

Suits Sachse pick up wiring 3.5mm

Fits Ducati Electronica (Stator Plate) Ignition model Bevel Twins 

7mm HT Copper Core Ignition Lead 1 x 800mm length of HT lead with 1 x straight coil connection and 1 x angled connection. Supplied in 1 length for you to cut into 2 pieces as 1 lead usually needs to be longer than the other. Supplied with different coil connections as we have found that this works well when using our single fire coil in the last photo (coil not supplied). The lead, when cut, is ready for you to screw into the spark plug cap directly and push on to the coil fitting for push on type connections. Coil connections are flexible silicon outer with good heat and chemical resi... [view details]

12V Voltage Regulator for dual phase alternators (3 wire). 

To Suit - 750 GT Roundcase, 900MHR electric start, Mille and Pantah Ducati's

2 phase - 3 wire Centre Tap - Yellow/Yellow/Red (2 x Yellow 1 x red from Alternator)

 

12V Voltage Regulator for single phase alternators (2 wire). 

For SD and SS Model Ducati's

2 Wire - Yellow/Yellow