L/H Thread Camshaft Nut for Ducati singles and V Twins
Authentic Reproduction Part
Finish - plain steel
Equivalent Ducati Part Number 0400.29.050
Replacement Billet Cush Drive Hub for use on rear wire wheels using 240mm discs and fitted with either Brembo or Lockheed callipers.
Can be used with our V2-16-203 disc carrier
This part is machined from a solid aluminium billet and is blasted externally so that, when fitted, it has an authentic original casting appearance.
Ducati Part 0797.80.440
Sold as a Pair
Billet Aluminium
Allows conversion of cast wheels to wire wheels on later Bevel models
Allows conversion of cast wheels to wire wheels on later Bevel Models
4 x Cap screws (M10x70) supplied with the part to replace the original hex head bolts
Replacement for original hub with wire wheels using 280mm 6 bolt discs.
To be used with V2-16-205 cush drive hub
Replacement for original hub with wire wheels using 240mm disc with either Brembo or Lockheed calipers.
To be used with our V2-16-205 cush drive hub.
Ducati Part
0755.29.210
Advantages
These footrests are exact replicas of the original factory units.
Material
Medium Tensile Steel - Zinc plated for authenticity
0624.69.253
0624.69.153
0624.69.250
Front Indicator Bracket SD.
Finished in Gloss Black.
Authentic reproduction bracket.
Equivalent Ducati Part Number 0801.37.095
Gear Gazer suits all Ducati Bevel Vee Twins. Includes Gasket.
Girling shocks to suit bevel twin Ducati motorcycles.
Most bevels only come in either 330 or 310mm shock lengths and are preload adjustable only.
The good thing about these Girlings is you can adjust the length easily via the screw collet to either the 330 or 310mm lengths.
Also there are a plethora of mounting spacers to suit pretty much any bike.
Indicator Stem Nuts
Finished in Chrome Plate
Equivalent Ducati Part Number 0820.03.436
Inlet manifold gasket kit to suit all bevel models with the "narrow stud" inlet manifolds. Includes o'rings and sold as a pair.
Will not distort and has machined o-ring grooves in order to provide a positive seal. Has the external appearance of the original factory item.
Billet Aluminium - Anodised Satin Black
Measurement stud centre to stud centre = 52mm
Inlet manifold gasket kit to suit all bevel models with the "wide stud" inlet manifolds. Includes o'rings and sold as a pair.
Measurement stud centre to stud centre = 58mm
Blank main bearing sleeve semi finished can be machined to required tolerance
Incorrectly sized Main Bearings Sleeves can be a trouble spot on Bevel drive Ducati's. If the fitment is a loose fit, the bearing sleeves can turn in their housings, or alternatively if the bearing sleeves are too tight, this can lead to cracked crankcases and an extremely short life span for your main bearings.
Carbon Steel
Main bearing sleeve machined to standard size for all bevel twins. (86.05mm)
This standard sleeve is machined to the exact size as the factory intended on their drawings.
0755.49.205
SD Front Indicator Stem
Authentic reproduction part
Equivalent Ducati Part Number 0801.03.450
5 Hole to suit all Bevel/Pantah/Early Belt
Light Weight Aluminium
Anodized for strength and wear resistance
Ducati Part Number 0755.92.295
SS Front Indicator Stem
Equivalent Ducati Part Number 0797.03.453
SS/MHR Rear Indicator Bracket
Equivalent Ducati Part Numbers 0797.03.080 and 0797.03.083
Japanese made NHK steering damper.
Not some cheap copy, these are exact replicas of the steering damper Mike Hailwood used on his 1978 TT wining NCR machine, and the same as used on early Darmahs.
Fantastic quality and built to last.
270mm in length.
test product
Prices are displayed without tax. Online payments are processed in AUD regardless of the displayed currency. Applicable tax is added in the checkout.
If you're unsure about the suitability of this part for your bike, send us a note here with the necessary information and we'll get right back to you.
+61 448 749 921 [email protected]
Vee Two Australia
Phone +61 448 749 921 Email [email protected]
ABN 34 642 249 750
Prices are in Australian Dollars inc 10% GST. International buyers will not pay GST.